Alpine soloist?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Ah, okay. I was thinking of this one (which has optional J-valve): XS Scuba Thermo One-Piece Twin Manifold for Scuba Diving

rx7diver
Close...bet same materials and design but mine is yoke only [DH] and cost $250 not $799! I believe they are actually made in Taiwan, not sure of that....but beautifully done.

Ps....Thought the plate on your DH was green [Voit] my error....you have a great reg there....
 
Little research on black finish on XS Scuba PVD,,,

PVD stands for Physical Vapor Deposition, a vacuum coating process that applies a thin, hard layer of material—often titanium nitride or similar compounds—onto a substrate like stainless steel or aluminum.
 
It can be VERY inconvenient and inconvenience multiple folks. Some divers must ren their gear, and changin valves is niot really easy.

It is an example not a prescription. "Some divers" can be used to argue for anything. I'd happily bet the vast majority of solo divers aren't renting cylinders on a regular basis.

Also, an H valve is a redunant first stage but not redundant air. Not really the sam,e thing.

How is it not the same thing? It allows you to manage air supply in the event of a catastrophic loss of air and preserve enough gas to reach the surface. You can argue about the semantics of the word (which I'm sure you will) but the end goal is to not have one single gas supply that can disappear with a single failure. Sure a neck oring can go but in 30 years I've never seen it happen other than when filling cylinders. Or they can just plain old run out of air but I would hope any solo diver is a little bit better than forgetting to look at their SPG.

And some who are not with us anymore because they chose to dive "their way" instead of taking reasonable precautions and/or redundancy....and not hear to post waht a bad idea that way.

Their choice. I'm not the dive police. 20 years ago I'd care but these days there is so much information so freely available that there's not much excuse for reinventing the square wheel. There aren't that many novel mistakes to make in diving any more that someone hasn't already made. Every time someone blasts themselves to Valhalla because their latest genius idea turned out to be more Jack Kevorkian than Jacques Cousteau there's a pretty good chance half a dozen people have made that same mistake before and this new guy either chose to ignore it or chose not to do any research. "This time it will work" is the phrase every divorce lawyer or undertaker loves to hear.
 
The US Navy CCR divers don't have OC BO. I suppose if you're defusing an acoustic mine or something like that it would be pointless.
The rest of us aren't in combat
It's not carried by the individual divers, but for Mk 16 decompression dives in EOD, they use a regulator second stage on a long hose attached to a line with a lead clump on the end that's hung ten feet below the first deco stop.
 
The Mk15 was designed to allow two people to breathe from one loop. There are versions that had T pieces with a spare loop connected to the main loop so that another diver could bail to his oppo's unit. You'll sometimes see units with velcro straps on the hump on the case. This is where the spare DSV was attached so the two divers could ascend doggy style. The Mk15 breathes well but that could not have been a fun way to end a dive. Better than drowning I suppose.

The manual also recommends using the ADV as an open circuit bailout in a total failure too. Again, that won't be a fun ride with a 3L bottle of gas.

View attachment 922890
Where did this diagram come from? We were using Mk 16 when I was in and I've never seen this.
 
Got to hope your buddy didn't have a big italian hoagie for lunch with that setup.
 
Where did this diagram come from? We were using Mk 16 when I was in and I've never seen this.

It's from the Rexnord Mk15/CCR1000 user manual.

1760974850938.png
 

Back
Top Bottom