Air consumption?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Gidds

Contributor
Messages
5,558
Reaction score
2
Location
Witness Protection Program (hiding from the MOFia)
I learned today that it takes me about 30-45 minutes to blow through 1000psi in cold water in a very slight current. Good, bad or indifferent?
 
Hee hee, about 11' :blush:
 
Gidds:
I learned today that it takes me about 30-45 minutes to blow through 1000psi in cold water in a very slight current. Good, bad or indifferent?

Average depth? Are we to assume an AL-80? With or against the current?

Pete
 
Ave. depth (new site to us, we were looking for the deeper water), AL 80, against the wee current. Want my measurements and other vitals too? ;)
 
Gidds:
Ave. depth (new site to us, we were looking for the deeper water), AL 80, against the wee current. Want my measurements and other vitals too? ;)

You may share any details you like but the depth is essential. Remeber those gas laws?

Pete
 
That would put your SAC (or RMV if you prefer) at .42-.64 Depending upon if you were down for 30 or 45 min (big difference) Good or bad is kind of irrelevant - it just "is" the way it is. It may give you a baseline for comparison against yourself and planning future dives in similar conditions, but that's about it.

Hope that helps
 

Back
Top Bottom