I recently acquired this computer. I have the instruction manual and a full tank of air. I can't seem to link the two together Any additional information would be appreciated. I have read previous information posted on the board with no luck. New batteries have been installed in both components. I don't see any other way to test the transmitter. The serial number of the transmitter does appear on the computer as TMT1. I never get a pressure reading.
Aeris Epic Transmitter linking.
- Thread starter SeaDog48
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
runsongas
Contributor
assuming you already did cycle the reg a few times to try to wake the transmitter, have the computer right next to the transmitter, double checked the 6 digit serial number input, and that you are on the norm surf screen, you will have to either find a friend with a known working computer/transmitter to test with or bring it to a LDS that can help.
Similar threads
