diy repair

  1. C

    Adding grip to latex gloves

    I just bought a pair of latex gloves to use with my dry suit. They are great gloves, but they are very slippery. Does anyone know of a good product to add grip to my gloves? I was thinking something like spray on PlastiDip but am open to other suggestions. Thanks!
  2. L

    Info My DIY manometer and IP gauge for under $100

    $20 Manometer $11 5” H2O Mano tube https://a.co/d/4H2Y4Ck $4 3/4 X 3/4 X 1/2 threaded T https://a.co/d/8AEsP7U (fits snug right into any reg mouthpiece, no need to cut the zip tie!) $3 1/4-in barb x 1/2-in F threaded Fitting...
  3. Piscine_caffiend

    Neoprene Bevel Tool

    Hi all, I do lots of neoprene repairs and I like to thin out the edges of patches that I use so that they're less likely to catch and lift. Currently I trim down the edges with a knife but it's slow and ugly. I'm wondering if anyone has used something like a leather working edge beveler and...
  4. tmassey

    Review Updated Write-Up for Regulator Service Technician Training - Unrestricted (December, 2021)

    Yet another patented write-up by @tmassey. Like always, it's LONG... Get comfortable. This is a write-up of my experience in the latest iteration of @rsingler's Regulator Service Technician Training class: https://www.scubaboard.com/communit...rvice-technician-training-unrestricted.605706...
  5. G

    Easiest current Scubapro 1st and 2nd stage to DIY repair?

    Hello, Please forgive me if this post should be in another area; I believe this is a general regulator question in the appropriate subcategory. Does anyone know of which currently made model from Scubapro, both 1st and 2nd stage are easiest to repair for a DIY user? From my research, this...
  6. gnulab

    MK21 Service Guide

    Hi, Does anyone have a copy of the service guide for ScubaPro MK21? I'm not sure of the torque of the 2 screws holding the bottom section and the main body. Thank you Henry
  7. raftingtigger

    Hard to find drysuit leak - likely in the inflator valve

    I have a REALLY hard to pin down drysuit leak that has gotten to the point that the suit is unusable. I have done just about everything I can think of to track down and fix the problem, but am getting frustrated at my lack of success. It is a well fitting DUI TLS womens large suit with SiTech...
Back
Top Bottom