d400

  1. rsingler

    D-series poppet o-ring

    For those of you that have plenty of old seats and use the reuseable stem for the D-400 poppet (metal orifice), I just had a custom run of 1.01mm x 4.57mm EPDM 50 durometer orings made for me. It's this o-ring: This oring was part of a problem I felt I had getting consistent sealing at low...
  2. D

    Closed: SOLD

    SOLD Scubapro MK20 and D400... only standard Scubapro regulator hose included Will include an analog Scubapro brass and glass SPG and HP hose. Includes LP inflator hose. Will attach used 2-gauge console with above SPG and depth gauge if interested... MK20 conversion via recall has not been...
  3. rsingler

    D400: shim to replace spring pad 11.015.306

    Earlier models of the D400 did not include the spring pad PN 11.015.306. To complicate things, Scubapro changed the name of the relevant parts from 11.011.106 "Spring Pad" for the G300/350/400 to 11.015.206 "Adjustment Pad" plus 11.015.306 "Spring Pad" for the later G400. The two "Spring Pads"...
  4. A

    Need a Scubapro D400 diaphragm

    Where can I get one? Or a used D400 second stage
    • AGH
    • Thread
    • d400
    • Replies: 3
    • Forum: SCUBAPRO
Back
Top Bottom