Search results

I think the 8x AMC 7135 drivers are probably the best cheap ones for driving the XML LEDs since they provide good efficiency, current regulation and accept input voltages in the range of 3V-6V or so which is close to the Vf of CREE LEDs. Input voltage needs to not be higher than 6V for them...

It does have wheels though they aren't very sturdy and don't provide a lot of ground clearance, works for me :) I'm a warm-water diver though in Hawaii with a 3mm full wetsuit which is more than enough for here, can really get away with a shorty or not even wear a wetsuit in the water here.

I've got one that works for all of my gear. Attaching a photo with my gear hanging up drying inside. It's just some PVC pipe from Home Depot and a tray to catch the drippings, one of those plastic tubs with wheels on it people would use to store stuff under their bed. Cost about $50 total...

PM Sent :)

Last of the photos here...

I got my Intova IFL 660 and just finished modifying it like I did my wide-angle Nova light, I took lots of pictures this time. Started off with disassembly, which took a vice and a pipe wrench to remove the head of the light (they glue them on) then the rest of the light was easily disassembled...

Drilled it out with a 3/4" drill bit .. left a small ring to keep the keyway that holds the LED pill in the correct orientation for the magnet. This one is going to be my video light with a fantasea blue ray tray on an ikelite housing for my canon point and shoot camera. Got the intova holder...

Finally got around to doing this after quite some time. What I managed to fit into the light... 1x TaskLED Hallsw board 1x 8x AMC 7135 Driver board (2.8Amps on High w/ 5 modes) 1x CREE XML U2 LED Everything fit just perfectly, to get the hallsw board to stay in place I cut an old GNC Goldcard...

Looking for diving buddies on the Island of Oahu to do some shore diving. A little about myself - I've done just over 50 dives most of which are off Oahu, own all my own Scuba equipment (BCD, Regs, DC, 2x Dive lights, Weights, tanks etc etc). My SAC runs about 0.5 to 0.6 on dives & I'm...

Might be worth checking out Sea Sports on Kauai when you're there they do a trip to Ni'ihau (the forbidden island) on Tuesdays and Thursdays .. I'm going to Kauai later in June to do this trip, it's one I've wanted to do for a while, it's an all day event though as they go out on boat to Ni'ihau...

Bump.. Price drop, will sell it for $125 shipped w/ the hose. Will consider offers. send PM, if you don't need the hose $95 shipped. Works fine.. selling as I switched to DIR

Price drop & added photos, $100 shipped w/o hose and $135 shipped w/ hose. Standard length hose.

Selling my Zeagle Octo-z LP Inflator/Backup regulator as I'm switching to a different setup. Has about 50 dives on it, due for it's annual service as well. Never had any trouble with it. Will sell with the LP hose for it for $160 shipped or without the hose for $120 shipped. Send PM if...

Looking to buy a set of weight pouches for my zeagle ranger. I have the trim pockets just looking for the front weight pouches drop me a PM I'm located in Hawaii and will pay USPS shipping rates and for pockets with paypal. Thanks

I've been looking at doing this as well with my LP 72's, what size manifold should be used with the 6.9" bands?

I'm currently deployed in Bahrain but I'm looking at buying some materials to finish this one off.

For a project I'm working on I've located and sourced some reed switches that can handle switching larger currents and are still in a small package. The switches I'm looking at are the COMUS MH5 reed switch, which is 11mm long and can handle a 2A switching current at 25V. They're rated for...

Ok, so I got a Intova Nova WA from a friend at work to modify after he saw the other lights that I've modified so far. This one seems to have some potential, there is an easy mod once you get it open to just swap the Q3 that they use in it with an XR-E R2, which I plan to do with the original...

Just saw a news release regarding CREE coming out with some new LEDs the Xlamp XM line. Says they'll be available this fall. Here's the article...CREE |Cree Announces Revolutionary New LED Platform Delivering 160 Lumens per Watt Sounds pretty cool, maybe something that would be good to...

Stock they suck only 33 lumens. So bad my work was throwing one away and I took it home and modified it to use a CREE XR-E R2 LED that I had. Pretty good with the mod, but stock not so much.