Be very careful and make sure you have the right sized Hex wrench or bit to install this. It is possible to over torque and spall the hex fitting. Too loose and you might have leaks or loosening in the regulator.
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
Be very careful and make sure you have the right sized Hex wrench or bit to install this. It is possible to over torque and spall the hex fitting. Too loose and you might have leaks or loosening in the regulator.
That is not a converter to allow you to use your yoke regs on your tank. That is a kit to allow a reg tech (or you?) to partially disassemble your reg, permanently remove the yoke and turn the reg into a dedicated DIN reg. As you bought new regs, if you wanted a DIN setup I would have suspected you would have just bought DINs for the same price as the yoke version?
Those AL DIN kits have been on something like a permanent backorder. I tried to get a couple for several years.
Your grand grand kids might run into someone diving the ones you soldOnly have the Mk 2 EVO left, in a fit of madness, I sold the others. It will do just nicely.