Question Sidemount Harness Y triglides

[SeanW]

Does anyone know where I can acquire these triglides? Pulled the image from a website selling the entire harness which I don't need. Andrew Goring at Sump UK no longer makes them. Thanks in advance!

 

[grantctobin]

2" inch Slotted Angle T Slider No/ Teeth "Flat Style"

Our newest piece of hardware is our T one piece slider with daul slots and angled This slider has smooth slots on both ends This is made to work with 2" inch webbing / 50mm Made of out our thick 1/8 304 marine grade stainless so you know it is durable for any of your diving needs We also tumble...

www.piranhadivemfg.com

 

[Jim Lapenta]

Randy has something similar at Piranha that may work for you. Grant beat me to it! 2" inch Slotted Angle T Slider No/ Teeth "Flat Style"

 

[SeanW]

I need one that has 3 slots so I can route the shoulder webbing back on itself

 

[grantctobin]

I need one that has 3 slots so I can route the shoulder webbing back on itself

In a pinch, you can use an additional triglide on the inbound strap and route it back through itself. Alternatively, a toothed triglide stacked atop the above linked part will work and prevent slipping.

Mind specifying the use case? If it’s for an H harness, the 90° ones are adequate. If it’s nearer the back, you can likely find a different butt (EDIT: lower harness not butt) plate.

Randy may also be amenable to making a run of them if there is sufficient demand.

 

[SeanW]

I’m looking for these triglides so I can create a Y harness where the straps run directly over the drop rings on the waist. This is for a nomad ray to replace the existing shoulder attachments. I don’t use a butt plate

 

[Jim Lapenta]

In a pinch, you can use an additional triglide on the inbound strap and route it back through itself. Alternatively, a toothed triglide stacked atop the above linked part will work and prevent slipping.

Mind specifying the use case? If it’s for an H harness, the 90° ones are adequate. If it’s nearer the back, you can likely find a different butt plate.

Randy may also be amenable to making a run of them if there is sufficient demand.

And that may take a while to do a custom run.

 

[SeanW]

This is the goal. Already own the drop d rings from sumpuk

 

[grantmac]

I'd just use the 90 degree T for that. Should be able to deal with the misalignment.
I've got a custom harness I'm running the same way and must admit I prefer it to the factory Xdeep arrangement enough to consider modifying my Stealth Tec.

 

[rjack321]

nvm