timz
Contributor
Lolx. I just bought a set of Atomic B2 + Z2 Octo + SPG for USD 557 based on the current currency exchange rate.
How to know if your regulators have been serviced properly?
- Thread starter phazza79
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
halocline
Contributor
I assume the OP is talking about aussie dollars, not U.S. dollars. $350 aus is about $250 USD. Still, that's what they might call 'bold' pricing, but I guess it wasn't enough to actually clean it, huh?
Phazza, cleaning the sand out of the 2nd stage is such a basic aspect of servicing a regulator that one wonders what else this "professional" might have left out. I would go back to the shop, talk to the owner, not the technician, show him the reg, see what happens.
Stories like this make me really glad I work on my own regs. You can too, by the way, it's not very complicated, if you're mechanically inclined.
Phazza, cleaning the sand out of the 2nd stage is such a basic aspect of servicing a regulator that one wonders what else this "professional" might have left out. I would go back to the shop, talk to the owner, not the technician, show him the reg, see what happens.
Stories like this make me really glad I work on my own regs. You can too, by the way, it's not very complicated, if you're mechanically inclined.
seeker242
Contributor
If it hasn't been near any sand after it got serviced, and it looks like that, I would be concerned!
oldschoolto
Contributor
Most times when a "scuba shop" services your regulators, you can tell because they don't work anymore...
Last edited:
- Messages
- 26,281
- Reaction score
- 5,875
- # of dives
- I'm a Fish!
My shop charges me for the service kit on one of my Atomics since I didn't buy it from them. Last time I noticed it was $32. And $60 for the service.
Before I started learning to service my own gear I used two different shops for two different brands. My usual LDS doesn't return any parts but he did send home a little packet of sand from one of my Bonaire trips. :blush:
timz
Contributor
http://www.scubaboard.com/forums/do-it-yourself-diy/515537-quick-vise-question-2.html
There is a link to another thread in post #16 you might find helpful.
If you search SB in the regulator and DIY forum you will find a lot of threads on this. My understanding is you can do it without the special tools but I decided to ordered several from Scuba Tools. Edit: And VDH and herman
Last edited:
timz
Contributor
Thanks mate. What about the pressure values. I've seen the LDS technician/boss/instructor/dive operator servicing a set of regs and test the pressure after.http://www.scubaboard.com/forums/do-it-yourself-diy/515537-quick-vise-question-2.html
There is a link to another thread in post #16 you might find helpful.
If you search SB in the regulator and DIY forum you will find a lot of threads on this. My understanding is you can do it without the special tools but I decided to ordered several from Scuba Tools. Edit: And VDH and herman
Do we really need to test the pressure?
I am just an amateur and a beginner at that. No one to be giving anyone advice but here is where I started...
SCUBA REGULATOR MAINTENANCE AND REPAIR by Vance Harlow
Regulator Savvy Book | Scuba Tools
I recommend these books to the OP as well. Probably the best defense against poor service is Knowledge, even if no plans to do the service themselves.
Similar threads
