Question How to add prescription lenses to a Scubapro Spectra Mini mask?

[BenedictDownBelow]

I would like to add prescription lenses to a Scubapro Spectra Mini mask.

I assume that one has to remove the mask frame to be able to replace the lenses. Just like with a Scubapro Spectra non-Mini mask. There are instruction videos on YouTube on how to replace the lenses on a Scubapro Spectra. But I have not yet found any instructions for a Scubapro Spectra Mini. The frame of a Scubapro Spectra Mini differs in various details from the frame of a Scubapro Spectra mask.

I don't want to break my Scubapro Spectra Mini, so how do I go about it carefully?

 

[happy-diver]

First I invested in many of these

1PC Portable Natural Bone Folder Tool For Scoring Folding Creasing Paper Leather Crafts for Handmade Leathercraft Tool - AliExpress 15

Smarter Shopping, Better Living! Aliexpress.com

vi.aliexpress.com

then went about the job, firmly

 

[RainPilot]

First I invested in many of these

1PC Portable Natural Bone Folder Tool For Scoring Folding Creasing Paper Leather Crafts for Handmade Leathercraft Tool - AliExpress 15

Smarter Shopping, Better Living! Aliexpress.com

vi.aliexpress.com

then went about the job, firmly

You mean you used these to remove the lens?

 

[happy-diver]

Initially I bought them for car dashboards and general trim and anywhere else where butchers poke screwdrivers

Many masks have a notch or loose tolerances and many do not where you can barely see any gap to fit anything
These bone tools are slick, with a sharp tip, where you can work them in between the frame and the lens retainer

Pop!

 

[Mascottrepair]

I would like to add prescription lenses to a Scubapro Spectra Mini mask.

I assume that one has to remove the mask frame to be able to replace the lenses. Just like with a Scubapro Spectra non-Mini mask. There are instruction videos on YouTube on how to replace the lenses on a Scubapro Spectra. But I have not yet found any instructions for a Scubapro Spectra Mini. The frame of a Scubapro Spectra Mini differs in various details from the frame of a Scubapro Spectra mask.

I don't want to break my Scubapro Spectra Mini, so how do I go about it carefully?

Totally get wanting to be careful , those Minis can be a bit tricky. The lens replacement process is similar to the regular Spectra, but the frame clips are tighter. Use a plastic tool or credit card edge to gently separate the frame. Take your time, work around evenly, and don’t force it. If you’re unsure, a local dive shop can usually pop them in without risking damage.