txdiver
Contributor
- Messages
- 124
- Reaction score
- 7
Hi All,
The following items are in need of a new home:
1 DUI TLS 350, DIR compliant w/ red CLX450 overlay, P-valve (right), Kevlar knee and elbow pads, Danny Riordan reinforced Turbo boots, Zip seals neck and wrists, high profile Apeks exhaust valve, Classic Zipper, bellows pockets; cave cut, new zipper.
If you are between 511 61, approx. 180-200lbs and wear street shoe size US 10.5 this suit will fit you perfectly. $1500
1 Set of Fourth Element Xerotherm Top, Bottom, Socks & Bag. $150
1 Set of Fourth Element Xerotherm Arctic, Top Bottom, Socks & Bag $200
1 Set of DUI Polartec PowerStretch Pro Jumpsuit 300 (gray). $75
1 Liquivision Zen w/ZAGG screen protector, 2 PC Interfaces w/ cables, 9 High Capacity batteries (ER 17335M - blue), up-dated battery tray, O-rings & lube AND 4 strap stems. $375.
1 Scubapro Tec 2G with a DSS bungee mount, an additional DSS mount and a spare battery. The plastic face is a bit scratched but very well readable under water. Also included is a SS "BenchMade" Hook/Safety Cutter. $200.
1 LM 24W HID light w/ a Halcyon #2 Reflector/Goodman handle, E/O connector, Delrin beaker protector and LM photo reflector with Goodman handle. This set-up is in great condition. $450.
1 DSS MED Kydex Plate, Hogarthian configuration w/ DIR cutting device & Argon mounting system. $125.00
1 Halcyon LED Scout (old version) 3 C-cell batteries w/ spare bezel. $75
2 SS DSS Glide Harness Adapters V1.0 w/ mounting hardware. ONLY fits DSS plates!
$25/each
1 SS DSS UnderCounterLung D-Ring. $10.00
1 SS DSS Side Mount Tail Plate. $25.00
5 Scubapro 2 Brass & Glass SPGs w/ spools in PSI (only used in an O2 clean environment). No boot. $45.00/each
1 OMS 2 Brass & Glass SPGs w/ spools in PSI. No boot. $25.00
2 Scubapro Mk16 1st Stages; in good condition but in need of service. $100.00/each
1 Scubapro R190; in good condition but in need of service. $50.00
2 Sets of 2 DiveRite elastic Hose Retainers XS. Fit 4.50 in/11 cm diameter. New. $10.00/each set
2 Sets of 2 DiveRite elastic Hose Retainers XS. Fit 4.50 in/11 cm diameter. Used once. $5.00/each
2 Sets of 2 DiveRite elastic Hose Retainers Xl. Fit 8.0 in/20 cm diameter. Used once. $5.00/each set
Photos are available upon request (I hate to clutter the site) - so pm me or send me an email at: achuber65@gmail.com for questions or photos.
Buyer pays shipping and PayPal fees.
Thanks for looking
Andy
---------- Post added July 27th, 2014 at 10:47 AM ----------
Clarification: The LM light is the head only - no battery can with it. Sorry for the confusion.
Andy
---------- Post added July 27th, 2014 at 05:00 PM ----------
One more clarification: the light head can work as a spare light head because it has the ballast and igniter in the head. If youy battery can only contains the 12V battery - and no igniter and/or ballast - you are good to go. All my batteries and light heads (LM or Halcyon) are interchangeable. I hope this answers questions that came my way via pm or email for other interested parties.
Thanks.
Andy
The following items are in need of a new home:
1 DUI TLS 350, DIR compliant w/ red CLX450 overlay, P-valve (right), Kevlar knee and elbow pads, Danny Riordan reinforced Turbo boots, Zip seals neck and wrists, high profile Apeks exhaust valve, Classic Zipper, bellows pockets; cave cut, new zipper.
If you are between 511 61, approx. 180-200lbs and wear street shoe size US 10.5 this suit will fit you perfectly. $1500
1 Set of Fourth Element Xerotherm Top, Bottom, Socks & Bag. $150
1 Set of Fourth Element Xerotherm Arctic, Top Bottom, Socks & Bag $200
1 Set of DUI Polartec PowerStretch Pro Jumpsuit 300 (gray). $75
1 Liquivision Zen w/ZAGG screen protector, 2 PC Interfaces w/ cables, 9 High Capacity batteries (ER 17335M - blue), up-dated battery tray, O-rings & lube AND 4 strap stems. $375.
1 Scubapro Tec 2G with a DSS bungee mount, an additional DSS mount and a spare battery. The plastic face is a bit scratched but very well readable under water. Also included is a SS "BenchMade" Hook/Safety Cutter. $200.
1 LM 24W HID light w/ a Halcyon #2 Reflector/Goodman handle, E/O connector, Delrin beaker protector and LM photo reflector with Goodman handle. This set-up is in great condition. $450.
1 DSS MED Kydex Plate, Hogarthian configuration w/ DIR cutting device & Argon mounting system. $125.00
1 Halcyon LED Scout (old version) 3 C-cell batteries w/ spare bezel. $75
2 SS DSS Glide Harness Adapters V1.0 w/ mounting hardware. ONLY fits DSS plates!
$25/each
1 SS DSS UnderCounterLung D-Ring. $10.00
1 SS DSS Side Mount Tail Plate. $25.00
5 Scubapro 2 Brass & Glass SPGs w/ spools in PSI (only used in an O2 clean environment). No boot. $45.00/each
1 OMS 2 Brass & Glass SPGs w/ spools in PSI. No boot. $25.00
2 Scubapro Mk16 1st Stages; in good condition but in need of service. $100.00/each
1 Scubapro R190; in good condition but in need of service. $50.00
2 Sets of 2 DiveRite elastic Hose Retainers XS. Fit 4.50 in/11 cm diameter. New. $10.00/each set
2 Sets of 2 DiveRite elastic Hose Retainers XS. Fit 4.50 in/11 cm diameter. Used once. $5.00/each
2 Sets of 2 DiveRite elastic Hose Retainers Xl. Fit 8.0 in/20 cm diameter. Used once. $5.00/each set
Photos are available upon request (I hate to clutter the site) - so pm me or send me an email at: achuber65@gmail.com for questions or photos.
Buyer pays shipping and PayPal fees.
Thanks for looking
Andy
---------- Post added July 27th, 2014 at 10:47 AM ----------
Clarification: The LM light is the head only - no battery can with it. Sorry for the confusion.
Andy
---------- Post added July 27th, 2014 at 05:00 PM ----------
One more clarification: the light head can work as a spare light head because it has the ballast and igniter in the head. If youy battery can only contains the 12V battery - and no igniter and/or ballast - you are good to go. All my batteries and light heads (LM or Halcyon) are interchangeable. I hope this answers questions that came my way via pm or email for other interested parties.
Thanks.
Andy