Will an oceanic omega II second stage will work with a Delta 4 / FDX10 1st as octo?

[lenbro]

Does anyone know if an oceanic omega II second stage will work with a Delta 4 / FDX10 1st as an octopus? I know the omega is simialir to a poseidon reg so this may be a problem? Thanks.

 

[knowone]

How are they similar.

 

[lenbro]

The second stage housing has the side exhaust like a odin. I also think it is down draft with servo assist? That is the part I am unsure of and if that is compatible with a regular diaphram 1st stage?

Also, anyone know if parts are a problem with the omega II second stage?

Thanks!

 

[knowone]

Fits easy on your first, great regs, plenty of parts.

If you tighten your hoses like ten men,

You MUST remove the valve from the body first.

 

[300bar]

Will it work..... Yes no problem.
Parts.... Oceanic just restarted the OmegaII part production again, so no worries.

 

[Akimbo]

I use an original Omega which used an oversize hose on the end port of the first stage turret. You may have to replace the hose if the Omega 2 is the same, but the IP pressure is the same as all the standard first stages.

 

[realdiver7]

Yes, it will work just fine. I recommend having any 2nd stage tuned to your 1st stage for maximum efficiency and performance. It's very easy and quick to do.