Why I love scubapro regs

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Celt

Contributor
Messages
2,184
Reaction score
1,828
Location
Ireland
# of dives
5000 - ∞
Yesterday after working for an hour in strong current and dirty water my reg started to breathe wet but I got finished and after a good wash opened the second stage this morning, happy days the diaphragm is fine. It’s amazing the conditions these will put up with and work fine.
 

Attachments

  • IMG_1614.jpeg
    IMG_1614.jpeg
    151.5 KB · Views: 59
  • IMG_1613.jpeg
    IMG_1613.jpeg
    199.7 KB · Views: 56
The only drawback IMO is the outer rubber diaphragm cover. I wish they were more like the Aqualung all metal 1085. But the barrel poppet and the ability to convert them to balanced makes the 109 superior.
I do have about six of those SP 109's and a 108, and I love all of them very much ❤️
 
Yesterday after working for an hour in strong current and dirty water my reg started to breathe wet but I got finished and after a good wash opened the second stage this morning, happy days the diaphragm is fine. It’s amazing the conditions these will put up with and work fine.
@Celt,

Yes, inhale too forcefully when breathing on a BA, and the valve will pull through like you show in your first picture, which causes the reg to breathe wet. Very common. You need only to pop off the exhaust T (no tools needed for this), re-seat the valve with your finger, and continue your dive even if you can't get the exhaust T back on right then.

I, too, am a BIG fan of the BA. I own several (purchased my first ones ca. 1987), and continue to use them.

rx7diver
 
@Celt,

Yes, inhale too forcefully when breathing on a BA, and the valve will pull through like you show in your first picture, which causes the reg to breathe wet. Very common. You need only to pop off the exhaust T (no tools needed for this), re-seat the valve with your finger, and continue your dive even if you can't get the exhaust T back on right then.

I, too, am a BIG fan of the BA. I own several (purchased my first ones ca. 1987), and continue to use them.

rx7diver
Good tip thanks, a purge with my thumb in the mouth piece usually clears any dirt but not this time,
 

Back
Top Bottom