JDelage
Contributor
All,
Other than the Apollo ones (pricy), which steel spring traps work on the Apollo biofins?
Other than the Apollo ones (pricy), which steel spring traps work on the Apollo biofins?
Which replacement springs for Apollo Biofins?
- Thread starter JDelage
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
- Messages
- 17,541
- Reaction score
- 9,788
- Location
- Somewhere between here and there
- # of dives
- 2500 - 4999
I imagine these would work. Very well made. Not the cheapest but quality.
Universal S/S Spring Straps - Dive Gear Express
Universal S/S Spring Straps - Dive Gear Express
A little off subject, but I recently replaced springs with 3/8" bungee at the suggestion of maxbottomtime.
http://www.scubaboard.com/forums/fi...in-question-time-heel-straps.html#post6586465
I was always uncomfortable with spring straps because you can’t tell when they are about to snap, short of sophisticated metallurgical testing. Bungee or shock cord fails slowly as individual rubber strands break and the outside woven fiber cover frays. Bungee also won't fail completely or suddenly unless under tremendous load. The best part is they are cheap, easy to replace, and adjustable.
The bungee happened to be the same size as the spring on my set. The molded rubber pull loop had broken so I replaced them with 1" Nylon webbing. The tension feels just like the springs they replaced. Hope it helps.
http://www.scubaboard.com/forums/fi...in-question-time-heel-straps.html#post6586465
I was always uncomfortable with spring straps because you can’t tell when they are about to snap, short of sophisticated metallurgical testing. Bungee or shock cord fails slowly as individual rubber strands break and the outside woven fiber cover frays. Bungee also won't fail completely or suddenly unless under tremendous load. The best part is they are cheap, easy to replace, and adjustable.
The bungee happened to be the same size as the spring on my set. The molded rubber pull loop had broken so I replaced them with 1" Nylon webbing. The tension feels just like the springs they replaced. Hope it helps.
Attachments
Last edited:
Similar threads
