reefrat
Contributor
Has anyone else encountered a K tank valve that when opened leaks gas around the handle and actually has a vacuum at the outlet orifice?
Weird new tank valve fault
- Thread starter reefrat
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
- Messages
- 20,561
- Reaction score
- 14,946
- # of dives
- I'm a Fish!
yes, that's a small oring that is replaceable without fully servicing the valve. O-ring 17 btw. Your LDS should be able to swap that out for basically free if you have a good relationship with them.
Tom is so bad to the bone.
DEdiveguy1
Registered
Agree!
The Chairman
Chairman of the Board
Most of them use an 010 o-ring and is easy to service yourself as well.
snowdog61
Contributor
You will need the special slotted flatblade driver to remove the screw (#7) retaining the knob though. Buy or make
- Messages
- 20,561
- Reaction score
- 14,946
- # of dives
- I'm a Fish!
For keeping in normal save a dive kit I prefer this one. Actually lives in my wet notes since valve knobs like to come off at the most inopportune times. In a shop setting you'll want the straight up notched screwdriver, but for individual divers these guys are a bit more versatile
Valve Knob Retainer Tool scuba
Valve Knob Retainer Tool scuba
OP
reefrat
Contributor
Thanks guys, lost track of this thread for a day or so but this is the info I need to fix that valve- there is no dive shop on this island so I try to keep spares of most things but this was my last tank valve.
Cheers
Cheers
captain
Contributor
The valve must be closed before attempting to replace the O ring.
Similar threads
