vixtor
Contributor
My Vyper Air started to have a strange behavior: while in some of the modes, the upper large digits (which display depth) have some of the LCD segments faded out (the upper segments). Surprisingly, they are not always faded out - sometime they look normal, sometime they are faded out, depending on which screen I am. More, sometimes there are more segments faded out, sometimes less segments are faded out. It gets worse when I enable the second EAN mix in the Nitrox settings, no matter what diving mode I use in fact (even if after that I use gauge).
I haven't noticed the behavior in water - only at surface. I'm not sure if the different properties of water makes the LCD segments visible even when faded out, or it is a pressure-related issue that is 'solved' underwater.
I have changed the battery to be sure it isn't a battery-related issue (even if he was saying battery OK). I wasn't very sure about the new battery (I had it for some time), but it also says battery OK with it, and the strange behaviour remains the same.
Anybody else had the same problem? And if yes, how was it solved?
I haven't noticed the behavior in water - only at surface. I'm not sure if the different properties of water makes the LCD segments visible even when faded out, or it is a pressure-related issue that is 'solved' underwater.
I have changed the battery to be sure it isn't a battery-related issue (even if he was saying battery OK). I wasn't very sure about the new battery (I had it for some time), but it also says battery OK with it, and the strange behaviour remains the same.
Anybody else had the same problem? And if yes, how was it solved?
