Suunto sk7 compass

[Paleface]

I just bought a suunto wrist mount compass and hated the band. It wasnt functional at all. So I cut the strap on each side and used a bungie and two small cable ties. I left the one cable tie loose until I try it on with my drysuit,pull it tight and cut it off.

 

[redacted]

A better solution is the DSS SK7 wrist mount. With 2 independent bungees, it is cheap and effective protection for an expensive compass.

 

[fnfalman]

I just bought a suunto wrist mount compass and hated the band. It wasnt functional at all. So I cut the strap on each side and used a bungie and two small cable ties. I left the one cable tie loose until I try it on with my drysuit,pull it tight and cut it off.

Cheap & functional. I like it.

I did the same to my XScuba depth gauge. Cut off the straps & leave enough stubs to drill four holes into the stubs then laced the holes with bungee cords.

 

[Peter_C]

The DSS mount is a lower profile and as stated above gives you redundancy.

https://www.deepseasupply.com/index.php?product=47
Pick up a mount for your computer too if it is listed. Also about 10' of bungee cord as over time you WILL use it all, or supply other divers in need.

 

[merxlin]

+1 on the 2 bungees are better than one theory. DSS mounts are great (and inexpensive), but at least add another to your setup.

 

[Dockmaster]

+1 on the DSS mount! I have a N2ition 3 computer and couldn't stand the digital compass it has, so I popped the SK-7 out of my old console and orderd the DSS mount. Works great!