Suex (or other DPV) stand

[ChrisMBC]

Needed a stand for my new (to me) ride, so here you go.

Designed to use 1 ½" (nominal size) ABS pipe. Print two of the stand, then slot in ABS pipe, and use solvent to secure if you feel like it.

Note the orientation for printing, the top side has filleted edges - print the completely flat side down. Suggest using a brim to prevent the part warping off the build plate.

Onshape model available here if you need to resize it for other scooters.

 

[ermin]

I hope this message finds you well. I came across your account about the stand you designed for the Suex underwater scooter, and I was truly impressed with your work.

If it’s not too much trouble, would you be willing to share the 3D printing files or design plans for the stand? I’d love to create one just like the one in your pictures for personal use

Needed a stand for my new (to me) ride, so here you go.

Designed to use 1 ½" (nominal size) ABS pipe. Print two of the stand, then slot in ABS pipe, and use solvent to secure if you feel like it.

View attachment 863277

View attachment 863278

Note the orientation for printing, the top side has filleted edges - print the completely flat side down. Suggest using a brim to prevent the part warping off the build plate.

Onshape model available here if you need to resize it for other scooters.

Designed to use 1 ½" (nominal size) ABS pipe. Print two of the stand, then slot in ABS pipe, and use solvent to secure if you feel like it.

View attachment 863277

View attachment 863278

Note the orientation for printing, the top side has filleted edges - print the completely flat side down. Suggest using a brim to prevent the part warping off the build plate.

Onshape model available here if you need to resize it for other scooters.

Needed a stand for my new (to me) ride, so here you go.

Designed to use 1 ½" (nominal size) ABS pipe. Print two of the stand, then slot in ABS pipe, and use solvent to secure if you feel like it.

View attachment 863277

View attachment 863278

Note the orientation for printing, the top side has filleted edges - print the completely flat side down. Suggest using a brim to prevent the part warping off the build plate.

Onshape model available here if you need to resize it for other scooters.

Needed a stand for my new (to me) ride, so here you go.

Designed to use 1 ½" (nominal size) ABS pipe. Print two of the stand, then slot in ABS pipe, and use solvent to secure if you feel like it.

View attachment 863277

View attachment 863278

Note the orientation for printing, the top side has filleted edges - print the completely flat side down. Suggest using a brim to prevent the part warping off the build plate.

Onshape model available here if you need to resize it for other scooters.

 

[happy-diver]

Do you have outriggers for going around corners