Solo Cave Diving: Equipment Configuration

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Yea, that is also what the shop said. Like most, I didn't assemble the valves as the tank came to me full. So I'd venture the guess that almost nobody knows how much lube is on their valve o-rings. The point here is it's possible to extrude that o-ring either through incompetence or bad luck. I guess the up side is it did fail pretty soon after fill (although it was almost a week). So if you have tanks you've been using for a bit you can be confident they should continue to be fine, but clearly, the risk is always there.
Anything is possible, but the odds are in your favor. The old 7/8 valves on the Norris HP tanks are known to extrude if you don't use a 90 duro o-ring. They had a very shallow o-ring land. They need to be wrench tight with a high duro or they will fail almost every time.
Most other tanks are fine being hand tight.
 
https://www.shearwater.com/products/teric/
http://cavediveflorida.com/Rum_House.htm

Back
Top Bottom