Single tank dual regs....
- Thread starter Ragnar
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
evil_xander
Contributor
The second one looks especially designer like. 
I got a Y valve myself, so it's not a problem to reach the valves at all.
http://www.inet.hr/~astancin/dss/yvalve2.jpg
I got a Y valve myself, so it's not a problem to reach the valves at all.
http://www.inet.hr/~astancin/dss/yvalve2.jpg
OP
Ragnar
Contributor
Well that's a heluva lot nicer eh? Cleanest layout I've seen. Seems easier to reach the valves than this one even.
I use the H valve (the first pic you posted) and I have no problem reaching the valves.
John_B
Grasshopper
I've been intrigued by these for a while now:
I'd like to get my hands on one of these from BeaverSports (beaversports.co.uk) but they don't sell them in the US and even if I could get the valve to fit a US tank, the lack of a burst disk would probably cause me a ton of headaches getting fills locally anyway.
This winter I've decided to just build my own set of doubles instead. YMMV.
John
I'd like to get my hands on one of these from BeaverSports (beaversports.co.uk) but they don't sell them in the US and even if I could get the valve to fit a US tank, the lack of a burst disk would probably cause me a ton of headaches getting fills locally anyway.
This winter I've decided to just build my own set of doubles instead. YMMV.
John
Tim Greaves
Contributor
I have a Thermo "H" valve on my LP120.. I havent had a chance to dive it yet but im planning to this weekend..
One thing that I did notice is that I had to turn both my XTX200 and DS4 the same direction so that they wouldnt bump into each other, I wish they added a little more room but I know that would lower the strength of the "H" adapter..
One thing that I did notice is that I had to turn both my XTX200 and DS4 the same direction so that they wouldnt bump into each other, I wish they added a little more room but I know that would lower the strength of the "H" adapter..
Similar threads
