coldstroke
Guest
I am rebuilding/servicing eight(8) scubapro regulators. I need a source to buy shims. Can anyone help;PM please? Thank you.
SHIMS for Scubapro regulators
- Thread starter coldstroke
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
superstar
Contributor
I use plastic shim stock of various thickness and cut out my own shims. I am able to fine tune the IP to within 2-3 lbs. The shim stock cuts easy with a razor knife (ID)and scissors (OD). Use a scubapro shim as a pattern.
OP
coldstroke
Guest
Where do you get stock?
halocline
Contributor
I've only seen two sizes of SP shims; the larger MK5, 15, 20 size and the smaller MK2, 10 size. Since you have several regs to rebuild, it's worth finding an alternative. I would look at a place like McMaster-Carr for brass shims or washers.
superstar
Contributor
tool crib at work
Similar threads
