several questions on the scuba pro line of regulators

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

you sure do have a way with words Wookie !! haha thx !!
 
The non-EVO mk25 ceased production in 2014 and was replaced by the Mk25 EVO in 2015. The non-EVO Mk17 is still available, while supplies last, and will be replaced by the Mk17EVO.
The Mk17 and Mk11 are the same except for the dry ambient pressure chamber, with secondary diaphragm, that keeps all working parts of the first stage dry.
The Mk25 is equipped with a 5-port low-pressure swivel, vs the fixed 4-port low-pressure cap on the Mk21. The performance differences are: non EVO Mk25- 301 SCFM; Mk21 265 SCFM.
The simplicity of design in both the Mk2EVO/R195 make them an excellent pairing.The Mk2 EVO can be paired with any of our second stages. Please refer to the regulator owner's manual for more detail.
http://www.scubapro.com/media/369689/scubapro_regulators-eng.pdf
 
so after also looking at the sub gear products (owned now by scubapro as far as i can tell) am i correct that the SG50 is the same as the mk17 with a c350 ? and the SG30 is the same as the mk11 but with a "less pretty" c350 ? just not sure i like the type of swivel on the sub gear 2nd stage. i think i would change that out.
 
https://www.shearwater.com/products/teric/

Back
Top Bottom