Sentry DPV dashboard between Piranha and Geneses 600

[Wildthing520]

The happiest dive for me is to have three piranhas and two Genese 600s taking turns to play. Now I have overcome the trouble of battery maintenance. The biggest problem is that my Piranha has no battery indicator, but I have a Logic Dive "Sentry DPV "Dashboard", after transforming the Anderson 75A connector of Piranaha, and after the salt water test, the sensitivity of the Sentry dashboard is higher than that of Geneses600. From then on, I can spend a little money to check the power between each DPV, making my diving activities easier And safe.

DSC_0154

• Wildthing520
• Feb 15, 2020
• 1

 

[moose_grunt]

Nice? What’s it look like inside the piranha?

Jim

 

[Superlyte27]

We just ordered these for the Genesis 2.1 and 2.2

I can't wait to play with them.

 

[Wildthing520]

Nice? What’s it look like inside the piranha?

Jim

Just change the power adapter to mount Sentry transmitter on the tail of the piranha

 

[Jon Nellis]

Just change the power adapter to mount Sentry transmitter on the tail of the piranha

We offer the Sentry with 75A Anderson connectors for other brands of DPV, no adapter needed. The small square is the water intrusion detector that is attached to the inside of the DPV at the normal low point.

Sentry DPV Dashboard Alt

• Jon Nellis
• Feb 27, 2020

Sentry Transmitter for other brands of DPV using the 75Amp Anderson connectors.

 

[Tianyi Lu]

We offer the Sentry with 75A Anderson connectors for other brands of DPV, no adapter needed. The small square is the water intrusion detector that is attached to the inside of the DPV at the normal low point.

Sentry DPV Dashboard Alt

• Jon Nellis
• Feb 27, 2020

Sentry Transmitter for other brands of DPV using the 75Amp Anderson connectors.

Where can you purchase this?

 

[Tianyi Lu]

We offer the Sentry with 75A Anderson connectors for other brands of DPV, no adapter needed. The small square is the water intrusion detector that is attached to the inside of the DPV at the normal low point.

Sentry DPV Dashboard Alt

• Jon Nellis
• Feb 27, 2020

Sentry Transmitter for other brands of DPV using the 75Amp Anderson connectors.

Also, would you need this adapter when using the Sentry with the Genesis 2.1? Or does the transmitter just connect natively?

 

[Adrien Le Cossec]

We offer the Sentry with 75A Anderson connectors for other brands of DPV, no adapter needed. The small square is the water intrusion detector that is attached to the inside of the DPV at the normal low point.

Sentry DPV Dashboard Alt

• Jon Nellis
• Feb 27, 2020

Sentry Transmitter for other brands of DPV using the 75Amp Anderson connectors.

Hi John,

I guess this adapter is for DPVs with single battery.

Is the Sentry compatible with the Dive X Blacktip Exploration (4 batteries Dewalt 12 Ah in total, but set up as 2 Batteries in series made of 2 DW 12 Ah each) ?

How easy/dificult is it to adapt, soldering the leads of the small power connector to the 75A Anderson connector ?

What is the price?

Thanks

 

[lostsheep]

We offer the Sentry with 75A Anderson connectors for other brands of DPV, no adapter needed. The small square is the water intrusion detector that is attached to the inside of the DPV at the normal low point.

Sentry DPV Dashboard Alt

• Jon Nellis
• Feb 27, 2020

Sentry Transmitter for other brands of DPV using the 75Amp Anderson connectors.

@Jon Nellis

bumping this for cost and availability. Cheers

 

[Jon Nellis]

The transmitter goes between the battery and motor controller connector. We build them with the smaller 15/30/45A Anderson connectors ($715) or the larger 75A Anderson connectors ($745).