Sea&Sea help needed

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Messages
1
Reaction score
0
Hi
I'm a new member and I already have a problem.
Lady friend called to see if I wanted an underwater
water camera from good will. Only cost 15.00 so I said go ahead.
Turned out to be a mm II.with strobe light and some other houseing that says
quest hiband! Big lenses on one end and a glass removable door on the other. Big
battery goes inside.
My questions are:
1. When strobe light comes on a red light lights up. Is that good or bad.
How do you test the strobe light?
2. When I put batteries into the camera nothing happens. Do you have to load film before you can find out if it works? Doesn't appear to have any on/off switches...
3. Does anyone out there have instructions for the camera?

Could use your help.

Enjoyh2o and thanks in advance for the help...

Tom
 

Back
Top Bottom