v4vikster
Guest
Does anyone know if the sea and sea ys-120 will work via fiber optic cable with a canon housing for the g10?
Thanks
Thanks
sea and sea ys-120 and canon housing?
- Thread starter v4vikster
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Ardy
Contributor
- Messages
- 1,319
- Reaction score
- 198
- Location
- Australia - Southern HIghlands NSW
- # of dives
- 2500 - 4999
It will definitely work in manual flash mode. I assume you are interested in TTL? The best thing is to just try it out. Set your camera to auto flash and the flash to TTL and take shots above water in the different modes to see if it works. NOTE : you may have to switch OFF preflash.
It may well do but Sea and Sea will not say it will or else they have to maintain it at that level.
If not, using a manual flash is easy with a digital camera and I have used my SnS 110a and a YS-50 both in manual mode for 2 years. Once you get used to the flash output you will be able to set the camera close to requirements most times. If you shoot in raw then you can make adjustments later.
Good luck - It's and excellent flash anyway.
It may well do but Sea and Sea will not say it will or else they have to maintain it at that level.
If not, using a manual flash is easy with a digital camera and I have used my SnS 110a and a YS-50 both in manual mode for 2 years. Once you get used to the flash output you will be able to set the camera close to requirements most times. If you shoot in raw then you can make adjustments later.
Good luck - It's and excellent flash anyway.
Similar threads
