Scubapro vs 4th Element undergarment

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

I have a scubapro k2 extreme which i use From 6-16 degrees (warmer i go for a lighter undergarment). Works good for me. And i wear a general thermo base layer, not a special diving one. Biggest improvement for me would be a better base layer i think.
 
I have a scubapro k2 extreme which i use From 6-16 degrees (warmer i go for a lighter undergarment). Works good for me. And i wear a general thermo base layer, not a special diving one. Biggest improvement for me would be a better base layer i think.
Don't you need too much weight with it ?
 
Don't you need too much weight with it ?
Nope not at all. I dive with the same amount of lead with my thick and medium undergarment. Difference is so small it is not worth to change the weighting.

With a drysuit and steel BP/W and a 10L steel bottle 2kg and with a steel 15L 0kg (both in fresh water, in salt water +2Kg
 
Nope not at all. I dive with the same amount of lead with my thick and medium undergarment. Difference is so small it is not worth to change the weighting.

With a drysuit and steel BP/W and a 10L steel bottle 2kg and with a steel 15L 0kg (both in fresh water, in salt water +2Kg
Ok nice :) so if you had 2x12L it would be 0kg too i guess . For now with 15L tank, 5-7mm wet suit and Al plate i need 0 , with dry suit i'll put the steel plate
 
I would be curious to compare 4th element Arctic vs Santi Flex 190
 

Back
Top Bottom