ADH
Registered
Where can I get a quick disconnect for Suunto Vytec transmitter?
Quick disconnect for Suunto Vytec
- Thread starter ADH
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Never heard of this. Why don't you leave it on the reg? If they made on of these, wouldn't it make your transmitter jut out too much and make it easier to snag or rip out?
I know of the quick disconnect for the cobra.
I know of the quick disconnect for the cobra.
StSomewhere
Contributor
I agree, no idea why you'd do this. Just unscrew the transmitter with a wrench and put the HP plug back in with an allen key.
Now, I saw pics of someone who added about six inches of hose between the first stage and the transmitter, that allowed them more flexibility than to just have the transmitter fastened to the first stage. That was cool.
Now, I saw pics of someone who added about six inches of hose between the first stage and the transmitter, that allowed them more flexibility than to just have the transmitter fastened to the first stage. That was cool.
OP
ADH
Registered
partridge:
There is one for Aladin' transmitter. So, instead of screwing/unscrewing, changing o-rings often, packing with the rest of the gear, I would like to snap it off and put in the hard case along with computer. Quick disconnect doesn't have to be long. 1"-1.5".
Somebody please correct me if I am wrong but wouldn't the Aladin work on a Suunto?
I mean the HP port is the same size and the transmitter would be the same tread right?
I mean the HP port is the same size and the transmitter would be the same tread right?
Similar threads
