bfuqua
Contributor
The pushbutton for the macro setting on our almost new canon 1400 housing pushes down but you have to press very hard and hold it there a while to make contact. Is there an adjustment for this?
Pushbutton not working for Canon 1400 housing
- Thread starter bfuqua
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Ikelite Staff
Contributor
Many pushbuttons on the backs of ULTRAcompact style cases are designed to depress all of the way to activate the control on the surface. This is done to account for compression of the case at depth.
If you received a small bag of replacement control tips with the housing, you could try installing a different tip (they are not glued on) to slightly lengthen the control. If not then PM me your address and I can have a couple of different tips mailed to you.
Regards,
Jean / Ikelite
IKELITE Underwater Systems
If you received a small bag of replacement control tips with the housing, you could try installing a different tip (they are not glued on) to slightly lengthen the control. If not then PM me your address and I can have a couple of different tips mailed to you.
Regards,
Jean / Ikelite
IKELITE Underwater Systems
OP
bfuqua
Contributor
I will send a PM to you. I really appreciate the great service I have received from Ikelite over the years.
Similar threads
