Anti-Hero
Contributor
Does anyone know where I can purchase a non-pull dump type elbow that connects my LP inflation hose to my wing?
Pull Dump
- Thread starter Anti-Hero
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
I've used this site as well, just remember, if you're using the elbow on a jacket or back inflated BC, make sure to check what size corrugated hose and inflator are on it. Oceanic, Aeris, Hollis, and a few others use 3/4" power inflators and hoses. Dive rite uses 1" hoses and inflators. The first time I switched a pull dump to an elbow using this method I had to order a corrugated hose and a new power inflator as soon as I figured that out the hard way. 
OP
Anti-Hero
Contributor
Awesome! Thanks for the link. I'm replacing the pull dump on a Dive rite rec wing, so that link was perfect.
Hollis Gear Nick
Contributor
I've used this site as well, just remember, if you're using the elbow on a jacket or back inflated BC, make sure to check what size corrugated hose and inflator are on it. Oceanic, Aeris, Hollis, and a few others use 3/4" power inflators and hoses. Dive rite uses 1" hoses and inflators. The first time I switched a pull dump to an elbow using this method I had to order a corrugated hose and a new power inflator as soon as I figured that out the hard way.
Oceanic and Aeris use 3/4". Hollis uses 1"
Similar threads
