PST... what size?

[squidguy]

I'm pretty much set on getting Pressed Steel LP's. I just gotta figure out the size - 95s or 104s???
I mostly dive off a boat with sit down bench/giant stride entry.
Currently wear a Zeagle Ranger. 5'6" and approx 180 lbs.
Probable start wearing the cylinders as singles with an eye to doubling em and possibly go to a backpate at that time. Would 104s be too big!?! Your words of wisdom appreciated!

 

[Rick Murchison]

Originally posted by squidguy
I'm pretty much set on getting Pressed Steel LP's. I just gotta figure out the size - 95s or 104s???
I mostly dive off a boat with sit down bench/giant stride entry.
Currently wear a Zeagle Ranger. 5'6" and approx 180 lbs.
Probable start wearing the cylinders as singles with an eye to doubling em and possibly go to a backpate at that time. Would 104s be too big!?! Your words of wisdom appreciated!

I use 95's as singles in the Gulf... I really like 'em. Plenty of gas.
Rick

 

[Uncle Pug]

Squid... at your height I would suggest the 95 cf...

Balance UW is more important than how they fit you on the bench...

But in either case the 104 is too long for you IMO.

 

[wheezy]

Heck I'm 6'5" and prefer the 95's

seriously your talking 9 cubic feet... at 10% overfill... not a big difference

and then there is Price... SOLD ON THE 95's..

good luck

 

[Lost Yooper]

I like my double 95's, but 104's are only like 2" longer and 3lbs heavier each. I bought mine out of convenience. I'd go with 104's if I had it to do over again, but I won't give up my 95's either.



Mike

I'm 5'10".