Pro Plus 2 Not reading pressure
- Thread starter JackConnick
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
OP
I don't have the Quick Disconnect version.
Hose works fine, hose with spindle (also tried a second one) in place works fine, no visible debris in end of PP2. I called tech support and he didn't have any better answers, so I'm sending it in.
They have a 2 year warranty, but it's been 3 years since I replaced my PP with it and then replaced the first unit 6 months later, etc. I guess it's possible that when the hose failed some salt water got injected into the gauge, although that seems remote. So I'll probably be out $150 for a rebuild, unless it's something simple.
I'll post back once it's repaired.
Jack
Hose works fine, hose with spindle (also tried a second one) in place works fine, no visible debris in end of PP2. I called tech support and he didn't have any better answers, so I'm sending it in.
They have a 2 year warranty, but it's been 3 years since I replaced my PP with it and then replaced the first unit 6 months later, etc. I guess it's possible that when the hose failed some salt water got injected into the gauge, although that seems remote. So I'll probably be out $150 for a rebuild, unless it's something simple.
I'll post back once it's repaired.
Jack
modiver71
Guest
Not a quick disconnect model. I've compared it with two other pressure gauges. Pro Plus 2 consistently measures about 300# less than actual tank pressure. Thoughts?
fppf
Contributor
Sounds like a leg in the sensor or electronics has shifted. I would send that one back for repair and calibration.
Similar threads
