Looking for some advice. I have the "peanut"-shaped OMS oxygen analyzer. The sensor has given up the ghost and I am having trouble finding a replacement sensor. Any suggestions?
:depressed:
Wetfox
:depressed:
Wetfox
Oxygen Analyzer Replacement
- Thread starter wetfox
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Give Joel Silverstein at Tec Diving Limited a call (Tech Diving Limited, The Leading Source for Diving Equipment) He should be able to hook you up
Peter_C
Contributor
Get the number off of the sensor and run it through google.
OP
Thanks for the suggestion. It was my first stop before posting on ScubaBoard. Spoke with NESS. While the sensor is on their website, they do not carry it anymore.
I also contacted Joel Silverstein. He suggested the Max 305 as a substitute.
Last edited:
That analyzer was a custom OMS unit. The most common sensor for it is the "molex" type connector. MAXTEC 305, Teledyne R22D, The original "red" OMS one was made by in the UK and the same ones we use in the OxySpy. An Earlier model unit used a different sensor.
Glad we could help you.
Cheers
JDS
Glad we could help you.
Cheers
JDS
any of the O2 sensors shown in the image below should work
Similar threads
