oms wing

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

A

andy j

Registered
Messages
22
Reaction score
0
Location
england
# of dives
200 - 499
I have had this wing for a couple of years with no trouble, however after a lay off for a few months I decided to check out all my gear.
I blew up the wing till it was firm and left it for about an hour.
When I checked it again it was about 3/4 full.
Now I have never tried this (filling and leaving full) do you think I have a problem or is it normal to lose a bit of air or should it stay inflated indefinite.
What do you guys think?
 
You might have a leak somewhere. Put it in the tub underwater and see if it bubbles anywhere. Then aquaseal the leak. I had the same thing happen on my old OMS wing too.
 
You should not lose 1/4 of your volume in a hour.

When checking the wing for leaks, don't forget to check your auto-inflator, too.
 
Fill to max then use some soap water solution with a sprayer....you will find your leak by the bubbles. You might want to remove the dumps and check for sand or other material preventing it from closing fully.
 
You must log in or register to reply here.
https://www.shearwater.com/products/peregrine/

Back
Top Bottom