chaco6053
Registered
Will a DSS LCD 30 wing fit on an OMS SS backplate? Does anyone have any experience with OMS gear? If the two are compatible I am looking at purchasing that setup. Does anyone have any opinions?
OMS backplate and DSS wing compatibility?
- Thread starter chaco6053
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
cool_hardware52
Contributor
It may or may not work. If you want to use a STA, then almost any wing and plate will work, including this combo. I don't know why you want to use a STA if you could avoid it.
There is no "standard" for the placement of the camband slots, or the holes in the center channel of the back plate relative to the camband slots.
In addition the shape, bend angle and center channel shape and depth will not be the same on an OMS plate and a DSS plate.
If you don't yet have a plate I'd suggest sourcing the plate and wing from the same manufacturer.
The discounts that we offer on a complete rig, i.e. a plate, wing, harness and cambands, is pretty substantial. And you get goods that designed to work together.
Tobin
Similar threads
