I am looking to get into a bp/w and have decided on the Apeks PSD WTX 30 wing and the OMS SS back plate with smartstream harness. From what I understand most wings and backplates will bolt together, but I cannot find anywhere if the cam strap slots line up. I was wanting to run a single tank without a STA if possible and that is the only issue I could see coming across. I have had no luck finding specs on either for the position or spacing of the slots/holes. Anyone have any input? Thanks in advance!
Oms backplate and apeks wtx wing compatibility?
- Thread starter Rfluhr
- Start date
-
- Tags
- backplate & wing
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
runsongas
Contributor
they don't line up completely, so 2 inch bands don't work. you can sort of get them to work with 1.5 inch bands.
you can cut the slots on the apeks wing longer to make it work also or use a sta.
you can cut the slots on the apeks wing longer to make it work also or use a sta.
Eric Sedletzky
Contributor
I would opt to elongate one of the sets of slots on the plate before I would mess with the wing slots.
Similar threads
