DiveGusto
Contributor
A while back I picked up an MK10 w/yoke to rebuild. As things go I decided to change it to a din. Found one on ebay and had a 1st stage attached to it that resembles an mk10 but is supposed to be an oceanic (no markings on it). The din fits my mk10 so happy about that but had no filter inside. Not sure how to get it apart which is another problem I have to solve.
Can anybody ID the reg. It has the larger diameter piston. The reg body is longer, and bigger diameter than an mk10. It has a sn# 095674 on side, maybe that gives year manuf. 2 HP ports and only 4 LP ports as there is not one on the turret bottom. The seat is flat on one side which was toward the top cover and the side meeting the piston tube is very deep concave. That may not be correct but was how I found it, also has a groove around it but can't imagine it is for an o ring. It had a shim that only fits on the piston side of the spring, hole is too small to fit on top and also looked like a roller coaster track like it had been heated/warped.
I was told it leaked from the top but appears to be more than just an o ring issue.
Any feedback appreciated.
Can anybody ID the reg. It has the larger diameter piston. The reg body is longer, and bigger diameter than an mk10. It has a sn# 095674 on side, maybe that gives year manuf. 2 HP ports and only 4 LP ports as there is not one on the turret bottom. The seat is flat on one side which was toward the top cover and the side meeting the piston tube is very deep concave. That may not be correct but was how I found it, also has a groove around it but can't imagine it is for an o ring. It had a shim that only fits on the piston side of the spring, hole is too small to fit on top and also looked like a roller coaster track like it had been heated/warped.
I was told it leaked from the top but appears to be more than just an o ring issue.
Any feedback appreciated.
