tsuyoshi
Contributor
How often do the O2 sensors need to be replaced?
O2 + CO analyzer choices.
- Thread starter Shurup
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Ah, yes, got 'ya.
I definitely hope the dome is not fixed on the COOTWO but rather is a screw-on dome, so the LPI adapter can be screwed on instead.
The NitroxBuddy system was an afterthought, it would seem, but no need to think of it afterwards for the COOTWO.
And how does one pronounce COOTWO?
"koo-too" +/-
Maybe C O O 2
I guess that's better than coot-whoa....
Will post image when I get to the office tomorrow.
---------- Post added August 30th, 2015 at 06:51 PM ----------
It depends on what O2 sensor are you using (cootwo can accept O2 sensors from several manufacturers - like the Nitroxbuddy device).
The O2 sensor provide with the unit (our Nitroxbuddy O2 sensor) should last 12 months.
---------- Post added August 30th, 2015 at 06:53 PM ----------
I pronounce it like in "cool too" ..... but I skip the "L" .... and I have an accent too
Nice. Glad I backed for the LPI adapter. I'm excited to try it out.
I just wanted to give you a quick update on this project.
On the hardware front the design is completed and we have issued purchase orders to the various manufacturers. We expect to start receiving various parts during November and are setting up final assembly / testing procedures and tools at our facility in California.
On the firmware front, the core code is completed. We are now fine tuning the temperature / pressure compensation algorithm (for both O2 and CO sensors).
On the Apps front, the Android version is ~80% done while the iOS version is ~40%. We expect to have both versions completed by early November.
In summary, so far we are still on track to begin shipping rewards during the month of December as per our original schedule.
If you missed the cootwo project on Kickstarter you can still pre-order your unit on our online store.
On the hardware front the design is completed and we have issued purchase orders to the various manufacturers. We expect to start receiving various parts during November and are setting up final assembly / testing procedures and tools at our facility in California.
On the firmware front, the core code is completed. We are now fine tuning the temperature / pressure compensation algorithm (for both O2 and CO sensors).
On the Apps front, the Android version is ~80% done while the iOS version is ~40%. We expect to have both versions completed by early November.
In summary, so far we are still on track to begin shipping rewards during the month of December as per our original schedule.
If you missed the cootwo project on Kickstarter you can still pre-order your unit on our online store.
WarrenZ
The Ultimate Bad Example
Will the house adapter for the nitroxbuddy clip on the cootwo also?
Similar threads
