Nuvair O2 Quickstick Case

[bonedoc18]

I bought a Quickstick and, like others had posted, was not satisfied with the cheap plastic in which it comes for providing sufficient protection, especially since the tube came cracked on arrival.

I ordered this:

.

It fits pretty well. There is some play in the length, but if you put the Quickstick in the mesh pocket, it holds very securely. Seems to provide reasonable protection and, while not waterproof, is water resistant. Most importantly, it doesn't roll off the table.

 

[NothingClever]

My Nuvair Quickstick plastic protective case also arrived cracked on one end. The analyzer is longer than the case so screwing together the case to the ends of the threads causes the domed sensor end to break the end of the protective case.

 

[tursiops]

I bought a Quickstick and, like others had posted, was not satisfied with the cheap plastic in which it comes for providing sufficient protection, especially since the tube came cracked on arrival.

I ordered this:

.

It fits pretty well. There is some play in the length, but if you put the Quickstick in the mesh pocket, it holds very securely. Seems to provide reasonable protection and, while not waterproof, is water resistant. Most importantly, it doesn't roll off the table.

Your link is not visible.....for those interested, it is Amazon item B081RB4XWK

 

[NothingClever]

I used Gorilla tape to reinforce the Quickstick case and I re-purposed a couple of the end caps from one of those tank control rigs (made of PVC pipe and rope) to protect the ends of the analyzer case. They’re a perfect friction fit - no glue required.