RESCUEDIVER
Contributor
New build released yesterday
CHDK Download - build 1.1.0, revision #2134
remember to back up your .cfg
CHDK Download - build 1.1.0, revision #2134
remember to back up your .cfg
New S100 CHDK
- Thread starter RESCUEDIVER
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Aqua-Andy
Contributor
Are the many changes? I tried following the links and couldn't find this info.
OP
RESCUEDIVER
Contributor
This is the 3rd update of the stable version (2002, 2057 and this- 2134)
I tend to update my SD card as they are released...obviously, it would seem reasonable that they fix "something"
It doesn't hurt to do so, and you won't lose your settings if you back up the cfg file then copy it back after unzipping CHDK to your card
---------- Post Merged at 12:13 PM ---------- Previous Post was at 12:09 PM ----------
Looks like the change is "Renaming CHDK version for better differentiation of the stable (CHDK-DE) and developer (CHDK_DE) version" per WIKI
Doesn't look like it affected actual performance
I tend to update my SD card as they are released...obviously, it would seem reasonable that they fix "something"
It doesn't hurt to do so, and you won't lose your settings if you back up the cfg file then copy it back after unzipping CHDK to your card
---------- Post Merged at 12:13 PM ---------- Previous Post was at 12:09 PM ----------
Looks like the change is "Renaming CHDK version for better differentiation of the stable (CHDK-DE) and developer (CHDK_DE) version" per WIKI
Doesn't look like it affected actual performance
samplin
Registered
I have a S100 and have been try without success to get CHDK to run. I am most likely skipping some simple step. Can someone take me trough the proper steps to install it?
Should I d/l the COMPLETE file or the SMALL? Just unzip to the SD card? I am working with a iMac but if it is easier with a windows machine I can do that. Is there a MAC program to make the SD card boot?
---------- Post Merged at 11:51 AM ---------- Previous Post was at 09:51 AM ----------
Still trying to get CHDK to work. It may be the firmware version I have. Used a program ACID to check the firmware, and I got this:
Does that make any sense to anyone?
Should I d/l the COMPLETE file or the SMALL? Just unzip to the SD card? I am working with a iMac but if it is easier with a windows machine I can do that. Is there a MAC program to make the SD card boot?
---------- Post Merged at 11:51 AM ---------- Previous Post was at 09:51 AM ----------
Still trying to get CHDK to work. It may be the firmware version I have. Used a program ACID to check the firmware, and I got this:
Does that make any sense to anyone?
Last edited:
OP
RESCUEDIVER
Contributor
Sorry I can't help with iMac..I use a windows 7 64 bit computer. I use the "Complete version"
High level format the SD card in the camera
Then run (I use this program) EOScard to make the SD card bootable (use a card reader or one built into the PC)
The unzip CHDK directly to the card via the card reader (you look like you are trying to loadrelease "a"...you need to check the camera to verify which firmware you have (ACID or cameraView work well)...the CHDK version must align with your firmware version...according to your JPEG it looks like your firmware version "101a"...so the downlaod is the 101a-1.1.0 full version
Lock the SD card and start (power on) the camera......CHDK should automatically load. Push "play back" button to toggle CHDK. Hold the play back button longer for playback
see this link
http://chdk.wikia.com/wiki/CHDK_quick_install_Guide
It looks like they just updated to version #2136 yesterday
High level format the SD card in the camera
Then run (I use this program) EOScard to make the SD card bootable (use a card reader or one built into the PC)
The unzip CHDK directly to the card via the card reader (you look like you are trying to loadrelease "a"...you need to check the camera to verify which firmware you have (ACID or cameraView work well)...the CHDK version must align with your firmware version...according to your JPEG it looks like your firmware version "101a"...so the downlaod is the 101a-1.1.0 full version
Lock the SD card and start (power on) the camera......CHDK should automatically load. Push "play back" button to toggle CHDK. Hold the play back button longer for playback
see this link
http://chdk.wikia.com/wiki/CHDK_quick_install_Guide
It looks like they just updated to version #2136 yesterday
Similar threads
