- Messages
- 17,524
- Reaction score
- 9,765
- Location
- Somewhere between here and there
- # of dives
- 2500 - 4999
I'm about to build the last new G250V I'm able to due to stupid parts pricing and some NLA parts.
All parts are new stock OEM with the exception of the jam nut which is a Halcyon Halo nut. I think they are better as no special tool is required. However, if someone wants 100% original I can get original spline jam nut.
I can assemble using either christo lube or silicone grease, unless using high O2 my preference is silicone as it's more tenacious. You can choose.
I can set it to use with any 1st stage ip you choose.
I have had no work at all for the past two weeks and very little over the past few months, a global wood shortage has slowed down the building industry significantly and our state of emergency in addition to the school summer holiday period stopped my part time teaching.
I'm not looking to rip anyone off but I'm not giving it away either. As most of you know parts have gotten very expensive over the past 2 years. There is no way I can sell it for the old price of $225 as that will not even cover cost price. Yep, they got expensive. Closer to $300 than $200 I'm afraid.
I can sell an additional new face plate and purge decal with it for anyone who wants to dive it but also would like it to look pretty again at some stage.
I will include a service kit at no extra cost and of course can supply more at a cost.
I have 2 other built by me G250Vs that have seen very little use and a fair amount of spares, levers, face plates, decals, flow vanes, springs, diaphragms, purge buttons etc etc so if someone wanted to go balls/vagina deep I'm happy to talk about a "lot" sale, being 2 lightly used G250Vs, 1 brand new G250V and a bunch of new stock OEM spares, pretty sure I've at least 8 new face plates for example.
Sincere apologies to @tridacna, you know my position well.
I know this is only a temporary solution to a long term problem but right now I need to buy time.
Please feel free to message me if genuinely interested and I can provide more info, stock list etc.
If you're looking for a cheap deal or are only prepared to low ball then it's best you don't message. I want as much as I can get for it all but would also like it to be fair to all parties.
Thank you
All parts are new stock OEM with the exception of the jam nut which is a Halcyon Halo nut. I think they are better as no special tool is required. However, if someone wants 100% original I can get original spline jam nut.
I can assemble using either christo lube or silicone grease, unless using high O2 my preference is silicone as it's more tenacious. You can choose.
I can set it to use with any 1st stage ip you choose.
I have had no work at all for the past two weeks and very little over the past few months, a global wood shortage has slowed down the building industry significantly and our state of emergency in addition to the school summer holiday period stopped my part time teaching.
I'm not looking to rip anyone off but I'm not giving it away either. As most of you know parts have gotten very expensive over the past 2 years. There is no way I can sell it for the old price of $225 as that will not even cover cost price. Yep, they got expensive. Closer to $300 than $200 I'm afraid.
I can sell an additional new face plate and purge decal with it for anyone who wants to dive it but also would like it to look pretty again at some stage.
I will include a service kit at no extra cost and of course can supply more at a cost.
I have 2 other built by me G250Vs that have seen very little use and a fair amount of spares, levers, face plates, decals, flow vanes, springs, diaphragms, purge buttons etc etc so if someone wanted to go balls/vagina deep I'm happy to talk about a "lot" sale, being 2 lightly used G250Vs, 1 brand new G250V and a bunch of new stock OEM spares, pretty sure I've at least 8 new face plates for example.
Sincere apologies to @tridacna, you know my position well.
I know this is only a temporary solution to a long term problem but right now I need to buy time.
Please feel free to message me if genuinely interested and I can provide more info, stock list etc.
If you're looking for a cheap deal or are only prepared to low ball then it's best you don't message. I want as much as I can get for it all but would also like it to be fair to all parties.
Thank you
