New dive rite wing and bp

[designateddiver]

I recently purchased a dive rite bp and wing (classic) and it was assembled at the store. However, when i got ready to do my first dive with it I began wondering if the wing was in the correct position. The deflate valve on the wing is on the inside of the wing and the inflator is on the backside closest to my manifold. Dive rite logo is facing tanks. Is this correct?

dd

 

[rickyd]

The inflator hose dump is on the outside (tank) side, at the top, and goes over your left shoulder. Depending on the wing it may be just to the left of top center ( Trek ), or closer to the left edge (Rec).

The lower dump valve is on your body side, at your left hand.

The logo's on the tank side.

 

[Dryglove]

designateddiver once bubbled...
I recently purchased a dive rite bp and wing (classic) and it was assembled at the store. However, when i got ready to do my first dive with it I began wondering if the wing was in the correct position. The deflate valve on the wing is on the inside of the wing and the inflator is on the backside closest to my manifold. Dive rite logo is facing tanks. Is this correct?

dd

Yes that is correct as thisis what your lower dump valve looks like under the surface. http://www.baue.org/images/gallerie...m07&id=P2160022

 

[designateddiver]

Thanks, I'm headed for the puddle to try weighting.

 

[designateddiver]

Thanks, I'm headed for the puddle to try weighting.