Need Service Manual for the BX Power Inflator

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

You don't. Zeagle will not sell you the parts claiming it is life support equipment and can only be serviced by an authorized dealer. However, you can purchase a Zeagle BC maintenance kit from Northeast Scuba Supply that has the Schrader valve module needed to fix most of the "sticking" problems.
 
Frogkick has the non-BX manual. IDK if they're similar enough internally but it will probably get you started in the right direction.

http://www.frogkick.dk/manuals/zeagle/
 
Frogkick has the non-BX manual. IDK if they're similar enough internally but it will probably get you started in the right direction.

http://www.frogkick.dk/manuals/zeagle/

Thanks. This is what I used as it looks like the internals are identical. I took the power inflator button and the parts with the O ring out and put silicone grease on the O rings, reassembled and the sticking is gone. My experience is that this has to be done every couple of years.
 
https://www.shearwater.com/products/swift/

Back
Top Bottom