Need an O-ring size

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

jchance

Contributor
Messages
180
Reaction score
38
Location
Tennessee
# of dives
5000 - ∞
I looked for an hour last night but could not find what I needed. Does anyone know the o-ring size for the battery compartment for a Scubapro Galileo Sol or Luna? Any help is appreciated!
 
Finally found it this morning! Hope it is correct.

Oring size for the Sol&Luna computers : 2mm x 12 mm

Oring size for the Sol&Luna transmitters: 2mm x 26 mm
 
@jchance After you've confirmed your finding, would you be kind enough to post them in this thread:
 
Did anyone find a good source and size on these.
I tried 26mm o.d. and 12mm o.d. And neither were the rige fit.
Would love to be able to put a few vitron rings in the kit. Funny that I can get stacks of batteries and no o rings
 
Look at post #2. McMaster-Carr is a good source.
Are the measurements in interior diameter because I got them in 12 and 26 outer diameter and they were not a match
 
When I get a little time I'll pull up my account from McMaster and find the part numbers.
 
McMaster-Carr for both o-rings

1--
Chemical-Resistant Viton Fluoroelastomer O-Ring
Super-Resilient, 2 mm Wide, 26 mm ID
1295N255

2--
Chemical-Resistant Viton Fluoroelastomer O-Ring
2 mm Wide, 12 mm ID
9263K176
 

Back
Top Bottom