For Sale Nauticam - Macro Port & Zoom Gear Set for Olympus ED 12-50mm lens

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Jungho Kim

Contributor
Messages
290
Reaction score
61
Location
Toronto, Ontario, Canada
# of dives
200 - 499
Hello all,

I am selling my current Nauticam Macro port & zoom gear as I am moving to the 60mm macro lens. I have only dove with it 6 times as I usually shoot wide-angle. However, I will be going to SE Asia for a big trip this year and will be going with a dedicated macro lens. The port and zoom gear goes of $1104.00 CAN at Mozaic Cameras -http://www.housingcamera.com/id2543-nauticam-36162.html. I will let it go for $600CAN!! If you are interested in the lens, I will let that go for additional $250 CAN. For US people take advantage of the low Canadian dollar! Shipping cost will be extra depending on location.

cheers, JK
 
You can keep the port for the 60mm lens, just sell the zoom gear. :)
 
I don't have the gear for the 60mm but I know it's the same length as the 12-50mm lens (3.23" vs 3.26") and I use the 60mm inside the 36161 port.

My guess is, since the Nauticam 36163 port doesn't have a side knob, the gear is controlled by the knob on the housing itself so the 36149 gear should fit inside the 36161 port since the 36161 port is much wider (to accommodate the complex gear for the 12-50mm).

I'd call the shop you buy Nauticam from and verify. I buy from Reef Photo and they tinker with these stuff a lot.
 
I don't have the gear for the 60mm but I know it's the same length as the 12-50mm lens (3.23" vs 3.26") and I use the 60mm inside the 36161 port.

My guess is, since the Nauticam 36163 port doesn't have a side knob, the gear is controlled by the knob on the housing itself so the 36149 gear should fit inside the 36161 port since the 36161 port is much wider (to accommodate the complex gear for the 12-50mm).

I'd call the shop you buy Nauticam from and verify. I buy from Reef Photo and they tinker with these stuff a lot.

Just found an older thread that states you can use both the 60mm and the 12-50mm in the 12-50 port. http://www.scubaboard.com/community/threads/if-you-only-had-2-ports-for-your-nauticam.450073/ I will try it out to confirm. Still need to figure out if I need separate focus gear for the 60mm.
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom