Nauticam Housing Moisture Sensor Replacement

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

When we first got our setup, the front ring started to slip a bit. Of course we were in Yap with no Nauticam dealer anywhere. We removed the rubberiz ring, cut up a business card to put between the rubber and the interior of the gear as a spacerl, then put the rubber back in. It's worked perfectly ever since. Nauticam came out with a fix (thicker rubber ring) some months later. We contacted the dealer where we bought it from and they wanted us to return the housing with our camera so they could get the right part. Needless to say, our fix is still in place and working perfectly.

We're also using the older AD style lenses (instead of the threaded 67mm mount). It took some effort, but we found the right parts and built a custom spacer that works like a champ. It's really convenient being able to just twist a quarter of a turn to change out the lenses.
 
https://www.shearwater.com/products/teric/

Back
Top Bottom