Name that contaminant

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

*dave*

Contributor
Scuba Instructor
Messages
964
Reaction score
163
These are pics of valves removed from cylinders for VIS. They had only been filled at two locations, so the source of contamination was pretty easy to track. I assume it's filtration medium, but unsure of its exact composition. It's extremely fine and has no taste or odor.

What is it?
TS002.jpg

bsG.jpg
 
aluminum oxide - If it's an aluminum tank.
 
Is it also building up in the divers regulators?
 
I am going to say that if the cylinders are AL that they got water in them causing an aluminum oxide slurry that found it's way to the valves.
 
Cylinders are steel and there is no detectable contamination of the regs. I'm speculating that the deposit was created during the fill and it adhered to the walls and valve. It wipes away easily, but doesn't just fall off without some help. Aluminum Oxide doesn't wipe off like this and isn't nearly as fine.
 
were these tanks shipped across any international borders?
 
I asked if they'd been diving Colombia lately, but that was not the case. The powder is tasteless.
 
Last edited:
I asked if they'd been diving Columbia lately, but that was not the case. The powder is tasteless.

Yeah... that was probably a good idea.
 

Back
Top Bottom