mk25/s600 and Atomic SS1 octo

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

29South

Guest
Messages
51
Reaction score
0
# of dives
0 - 24
hi,
I am planning on getting a scubapro mk25/S600 from my LDS and the Atomic SS1 from a not too LDS... This will likely be on an Aeris BC

I have seen comments relating to 1st stage air pressure requirements of atomic SS1... are their compatability issues i should be aware of?
 
Why not just get an Atomic first stage as well? B2 or Z2? They are built to work with the SS1 and I think the Atomic is a better reg anyway.
 
the mk25/s600 is from my lds which has offered (and given) excellent support and service. Unfortunately they doesnt do atomic..

I am attracted to the SS1 cos of the low profile and the ability to swap across BCs with the quick disconnect. The atomic dealer is 75 miles away but I was justifying the ss1 based upon a 2yr service requirement.
 
Service may be a PITA but the combo should work fine if that is what you want.
 
Go for Mk25/S600 never regret good performance regs
 
https://www.shearwater.com/products/swift/

Back
Top Bottom