Looking for some specific regulator service tools...US Divers/Aqualung.
- Thread starter Tm530
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Iguana Don
Guest
- Messages
- 2,203
- Reaction score
- 4
LDS and maybe they will order them from the manufacturer for you.
ID
ID
Vintage Double Hose has the high pressure Conshelf/Titan guide block. I made my own but then bought theirs and was then given another interation of the same thing. These are used on the Aqua Masters--but--since the Royal Aqua Master is a Conshelf/Titan with double hoses--yep--it should work for pushing the spring and sintered filter and other innards into your Conshelf/Titan.
For the valve handwheel tool I went to Harbor Freight and found a nice wide blade driver and then cut a slot in it, looks Pro and works great. I make most of my tools but I do recommend the tool from VDH, it is made by a fellow for that on line store and it is a quality piece.
One thing, JFYI, did you guys know that snap rings (in some places called CirClips or circle clips) have a flat side and a round side--cut side and stock side. The stock side, flat side goes to the direction away from pressure.
In another thread that turned nasty I had made the offer of a set of these custom tools and several others for the Titan/Conshelf made by me and a complete rebuild kit and diagrams to the OP (for free) but then after being lambasted and name called and kicked in the teeth I retracted the offer. Sorry, the offer remains forever retracted but please try the source I listed and get creative and make your own.
N
For the valve handwheel tool I went to Harbor Freight and found a nice wide blade driver and then cut a slot in it, looks Pro and works great. I make most of my tools but I do recommend the tool from VDH, it is made by a fellow for that on line store and it is a quality piece.
One thing, JFYI, did you guys know that snap rings (in some places called CirClips or circle clips) have a flat side and a round side--cut side and stock side. The stock side, flat side goes to the direction away from pressure.
In another thread that turned nasty I had made the offer of a set of these custom tools and several others for the Titan/Conshelf made by me and a complete rebuild kit and diagrams to the OP (for free) but then after being lambasted and name called and kicked in the teeth I retracted the offer. Sorry, the offer remains forever retracted but please try the source I listed and get creative and make your own.
N
Similar threads
