Looking for a Stage 1 for a Aqualung Titan LX Supreme

[DeepblueScubaWill86]

Hello fellow divers, I recently purchased a 2nd stage and alternate air source(Titan LX Supreme), it did not come with the 1st stage yoke. I am hoping someone has one that can be purchased in working condition, or in need of repairs. Thanks everyone!

 

[runsongas]

are you looking for a whole first stage or just a replacement yoke?

the parts to the yoke are still available iirc, you just would have to get them from an aqualung dealer. if you are missing the whole assembly you need 6 parts to replace the yoke assembly. yoke screw (127574), yoke (124611), yoke valve (129207), yoke crown (129205), spring (129204), and yoke retainer (129242).

 

[claymore]

I may have a Titan LX Supreme, Dry Seal Environmental Seal, 1st stage for sale. It had its full service last December and has maybe 15 dives on it. It is the original Titan not the newer model that looks like the Core. I also have the DIN conversion for it.

The original Titans do come up on eBay quite regularly. If you are not planning on diving cold water you do not need the Dry Environmental Seal.

 

[herman]

If you are looking for the entire first stage you have a lot of options. Any first stage will work fine, there is no requirement that first and second stages be the same brand much less the same model. Also, there are 2 versions of the Titan, an older one (my preference) and the newer model, again either will work fine. Then are also plenty of older but very good first stages to be had that will work perfectly, the US Divers/AL Conshelf is an older model that would work great.

 

[DeepblueScubaWill86]

Yes I need the entire first stage I have my hoses and both 2nd stages

---------- Post added December 24th, 2015 at 09:30 AM ----------

We do plan on doing cold water diving. That sounds great. Please update me with details

---------- Post added December 24th, 2015 at 03:37 PM ----------

I may have a Titan LX Supreme, Dry Seal Environmental Seal, 1st stage for sale. It had its full service last December and has maybe 15 dives on it. It is the original Titan not the newer model that looks like the Core. I also have the DIN conversion for it.

The original Titans do come up on eBay quite regularly. If you are not planning on diving cold water you do not need the Dry Environmental Seal.

Do you happen to have a picture as well the cost?
Thanks