SteveC
Contributor
I have a leaky exhaust valve on my BC. It helps to stretch the spring a little to put more pressure on the seal, but then is starts leaking again. Does it need a new valve or spring?
Leaky BC valve
- Thread starter SteveC
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
R
redacted
Guest
It's probably time for a new seat. You might be able to turn the one in there now over for a temporary fix.
boat sju
Contributor
A little silicone spray worked on mine, but my bc is old so I had nothing to lose by trying it.
dumpsterDiver
Banned
- Messages
- 9,003
- Reaction score
- 4,661
- # of dives
- 2500 - 4999
The seat is probably fine. I would check it and clean it and try to re-seat the seat. I have seen salt crystals cause problems with the over pressure releif valve.
I would not stretch the spring out, but instead get a new one. I have had springs fail and this will cause a complete loss of the ability to hold air.
I would not stretch the spring out, but instead get a new one. I have had springs fail and this will cause a complete loss of the ability to hold air.
jumbo
Guest
dude- buy a new spring
Mandy3206
Contributor
Cleaning and lubing with silicone grease may be your best first choice
Similar threads
